2006 Toolmex TUR 630 MN 4000
CNC Engine Lathe
Control: Siemens 810D
Swing Over Bed: 25″
Swing Over Cross Slide: 14.6″
Distance Between Centers: 157″
Max Weight Between Centers: 3,300 LBS
Spindle Speeds: 20 – 1,800 rpm
Spindle Bore: 5.5″
Spindle Motor: 25 hp
Spindle Nose: D-11
Tailstock Taper: MT 5
-EQUIPPED WITH-
Front & Rear 16″ 4-Jaw Chucks
Dorian DA Type Tool Post
1995 Hardinge CONQUEST T51
CNC Turning Center
Control: Fanuc 18T
Bar Capacity: 2″
Max Swing: 19.5″
Center Distance: 25″
Spindle Speed: 3,500 RPM
Number of Turret Positions: 12
-EQUIPPED WITH-
Chip Conveyor
16C Collet Chuck With Collet Pads
Hardinge 8” Dia. 3-Jaw Chuck
Ha-Matic Seven 51 Bar Feeder
1990 Mori Seiki AL-20BTM
CNC Turning Center
Control: Fanuc OT MATE
Swing Over Bed: 18.9″
Swing Over Carriage: 12.2″
Distance Between Centers: 21.7″
Max Machining Diameter: 9.8″
Max Machining Length: 19.7″
Spindle Nose: A2-6
Spindle Thru Hole: 2.2″
Spindle Speed: 3,500 RPM
Spindle Motor: 10 HP
Tailstock Taper: MT4
Number of Turret Positions: 8
Machine Dimensions: 93″L x 50″W
Machine Weight: 6,200 LBS
-EQUIPPED WITH-
6″ 3-Jaw Chuck
Chip Conveyor
Tail Stock
Extra Misc Turret Tooling
Machinery Manuals
More Info: http://2spade.com/1990MoriSeikiAL20BTM.html
1994 Mazak QUICK TURN 28N
CNC Turning Center
Control: MAZATROL T-32-2
Swing Over Bed: 20.3″
Max Turning Dia: 12.5″
Max Machining Length: 39.76″
Bar Capacity: 2.75″
Spindle Nose: A2-8
Spindle Bore: 3.12″
Spindle Speed: 3,000 RPM
Spindle Motor: 25 HP
Number of Turret Postions: 8
Machine Dimensions: 135″H x 73″W x 73″H
Machine Weight: 12,500 LBS
-EQUIPPED WITH-
12″ Kitagawa Chuck
LNS Barfeeder
Chip Conveyor
Tool Eye
Tail Stock
Parts Catcher
More Info: http://2spade.com/1994MazakQUICKTURN28N.html
1989 Mori Seiki SL-15
CNC Turning Center
Control: YASNAC LX-3
Max. Swing: 17.7″
Max. Turning Dia.: 6.3″
Center Distance: 23.4″
X-Axis Travel: 5.3″
Z-Axis Travel: 22″
Max. Bar Capacity: 1.7″
Spindle Motor: 10 HP
Spindle Speed: 6,000 RPM
Spindle Nose: A2-5
Turret Positions: 12
Tailstock Taper: MT4
Machine Dimensions: 99”L x 55”W x 65”H
Machine Weight: 7000 lbs
-EQUIPPED WITH-
6 Inch Chuck
Tail Stock
**TWO IDENTICAL MACHINES AVAILABLE**
More Info: http://2spade.com/1989MoriSeikiSL15.html
1993 Citizen CINCOM L16
CNC Swiss Type Lathe
Control: Cincom System
Max. Machining Diameter .687″
Max. Machining Length per One Chuck: 8.1″
Max. Drilling Diameter: Up to .394″
Spindle Speed: 200 – 10,000 rpm
Back Work Max. Chucking dia. of Pick off Spindle .687″
Back Work Pick off Spindle Speed: 200 – 5000 rpm
Back Work Pick off Spindle Motor: 2 HP
Back Work Min. Spindle Index: 1 Deg
Number of OD Turn Tool Stations: 7
Number of Front ID Tool Stations: 3
Number of Back ID Tool Stations: 3
Number of Live Tools: 3
Rotary Spindle Speed: 200 – 5000 rpm
Rotary Tool Motor: 5 HP
Required Floor Space: 65″ X 37″
Approx Weight: 3300 lbs.
-EQUIPPED WITH-
Iemca MINI BOSS 325 CNC Bar Feeder
More Info: http://2spade.com/1993CitizenCINCOML16.html
1961 Monarch 18 X 30
Engine Lathe
Serial Number: 8892
Swing Over Ways: 18.5″
Swing Over Cross Slide: 11″
Distance Between Centers: 30″
Spindle Hole: 1.5″
Spindle Speeds: 24 – 1,028 RPM
Threading Range: 2 – 120 TPI
More Info: http://2spade.com/1961Monarch18X30.html
2002 Miyano ANC-35
CNC Turning Center
Control: Fanuc 11-TT
Max Swing: 14″
Turning Diameter: 12″
Turning Length: 14″
Main Spindle Speed: 4,000 RPM
Main Spindle Bar Capaicty: 1.375″
Upper Turret Stations: 12
Lower Turret Stations: 6
Machine Dimensions: 156″L x 121″W x 80″H
Machine Weight: 15,500 LBS
-EQUIPPED WITH-
S16 Hardinge Master Collet with 3-insert jaws (Both Spindles)
One Live Tool On Upper Turret
Parts Catcher & Conveyor
Chip Conveyor
Machine Manual
More Info: http://2spade.com/2002MiyanoANC35.html
1988 Warner & Swasey TITAN
CNC Turning Center
Contol: Fanuc GN11
Swing Over Bed: 29″
Swing Over Carriage: 18.5″
Max Turn Diameter (Upper Turret): 18″
Max Turn Diameter (Lower Turret): 12″
Max Turn Length: 30″
Bar Capaicty: 4.5″
Spindle Bore: 5.28″
Spindle Speeds: 7 – 3,170 RPM
Spindle Nose: A2-11
Spindle Motor: 40 HP
Upper Turret Stations: 12
Lower Turret Stations: 8
-EQUIPPED WITH-
Collet Chuck With 4-insert jaws
Chip Conveyor & Chip Hopper
Coolant Tank
Machine Manual
1986 Miyano ANC-45
CNC Turning Center
Control: Fanuc 11-TT
Max Swing: 23.62″
Max Turning Length: 15″
Spindle Bar Capaicty: 1.75″
Spindle Speeds: 40-4000 RPM
Spindle Motor: 15 HP
Spindle Nose: A2-6
Sub-Spindle Bar Capacity: 1.62″
Sub-Spindle Speeds: 40-4000 RPM
Sub-Spindle Motor: 5 HP
Sub-Spindle Nose: A2-5
Number of Upper Turret Stations: 12
Number of Lower Turret Stations: 6
-EQUIPPED WITH-
S20 Hardinge Master Collet w/ 3-insert jaws (Spindle)
S16 Hardinge Master Collet w/ 3-insert jaws (Sub-Spindle)
Parts Catcher & Conveyor
Chip Conveyor
Machine Manual
***TWO MACHINES AVAILABLE***
More Info: http://2spade.com/1986MiyanoANC45.html
Two Spade Machinery News Feed 