2005BirminghamDLC16120-1

2005 Birmingham DLC-16120

Manual Engine Lathe

Swing over bed: 16″
Swing over cross slide: 9″
Swing over gap: 27 1/2″
Length of gap: 10″
Distance between centers: 120″
Spindle bore: 4 1/8″
Spindle nose type: D1-8
Spindle taper: MT-6
Spindle speeds: 16
Spindle speeds range: 26 – 1,700 rpm
Spindle center to bedway: 8 5/8″
Threads per inch (No.) range (T.P.I.): (42) 7/16 – 80
Metric threads (No.) range (mm): (37) 0.5 – 80
Module threads (No.) range (mm): (32) 0.25 -40
Diametral threads (No.) range (mm): (42) 7/8 – 160
Long. feeds (No.) range (in/rev): (45) 0.0017 – 0.058
Cross feeds (No.) range (in/rev): (45) 0.0009 – 0.029
Leadscrew diameter: 1 9/16″
Leadscrew TPI: 2
Feed rod diameter: 1″
Tooling size: 1″ x 1″
Compound slide travel: 5 7/8″
Cross slide travel: 13 3/4″
Tailstock taper: MT-5
Quill travel: 6″
Quill diameter: 3″
Main Drive: 10 HP, 220/440V, 3ph
Maximum workpiece weight: 1,100 lbs
Steady rest capacity Min/Max: 1 1/8″ – 6 1/4″
Follow rest capacity Min/Max: 3/4″ – 3 1/8″
Width of bed: 15 1/2″
Overall dimensions (L x W x H): 182″ x 47″ x 54″
Net weight approx.: 6,680 lbs

More Info: http://2spade.com/2005BirminghamDLC16120.html

Advertisements