2005DaewooPUMA2500LSY-1

2005 Daewoo PUMA 2500LSY

CNC Turning Center

Control: Fanuc 18i-TB
Swing Over Bed: 23.6″
Swing Over Carriage: 21.6″
Maximum Bar Capacity: 3″
Maximum Turning Diameter (Main Spindle): 13″
Distance Between Main & Subspindle Nose: 43.7″
X-Axis Travel: 9.84″
Z-Axis Travel: 32.6″
Angle of Slant Bed: 30°
X-Axis Rapid Traverse Rate: 790 IPM
Z-Axis Rapid Traverse Rate: 945 IPM
X and Z-Axis Ball Screw Diameter: 1.3″

-MAIN SPINDLE-

Chuck Size: 10″
Spindle Speed: 35 – 3500 RPM
Spindle Bore Diameter: 3.4″
Spindle Motor: 30 HP
Maximum Spindle Torque: 319 ft/lb

-SUB SPINDLE-

Chuck Size: 8″
B-Axis Travel: 32.7″
Sub-Spindle Guideway Span: 9.8″
Spindle Speed: 60 – 6000 RPM
Spindle Bore Dia.: 1.77″
Spindle HP: 10 HP
Rapid Traverse Rate: 787 IPM
Minimum Angle: .001 DEG

-MAIN SPINDLE C-AXIS-

Rapid Traverse Rate: 200 RPM
C-Axis Minimum Angle: .001 DEG

-TURRET & ROTATING TOOLS-

Number of Turret Stations: 12
Boring Bar Diameter (Main Spindle): 1.5″
Boring Bar Diameter (Sub Spindle): 1″
Turret Index Time: .1 sec.
Tool Holder Type: BMT 55
Rotating Tool RPM: 50 – 5000 RPM
Rotating Tool Spindle Motor: 7.5 HP

-Y-AXIS-

Y-Axis Travel: 4″ (+/- 2″)
Y-Axis Rapid Traverse Rate: 295 IPM
Y-Axis Repeatability: .00012″

-EQUIPPED WITH-

 

LNS Quick Load Servo S3 Bar Feeder
Chip Conveyor
Parts Catcher
Tool Probe
Y-Axis
Sub-Spindle with Ball Screw Positioning
Full C-Axis
6ea. Turn tool blocks
3ea single OD pods
3ea three hole OD pods
2ea straight on turn blocks
2ea Part off holder blocks
6ea Live -X- axis tools
4ea Live -Z- axis tools

**Power on 45972 hours**
**Operating time 27420 hours**
**Cutting time 14082 hours**

More Info: http://2spade.com/2005DaewooPUMA2500LSY.html

FOR ALL SURPLUS CNC…………..SURPLUSCNC.COM

Advertisements