2003TsugamiTMA8-1

2003 Tsugami TMA8

7-Axis Mill/Turn Center

Control: Tsugami-Fanuc LH1 (18i-TA)
Chuck Diameter: 8″ (203mm) Hollow
Max. Machining Diameter: 8.66″ (220mm)
Max. Bar Machining Capacity: 2.55″ (65mm)
Max. Machining Length: 14.56″ (370mm)

TAVELS

X-Axis Travel: 16.9″ (430mm)
Y-Axis Travel: 4.72″ (120mm)
Z-Axis Travel: 15.74″ + 6.5″ (400mm + 165mm)

MAIN WORK SPINDLE

C-Axis Main Spindle Rotation: 360,000/ 0.001 Deg.
Spindle Speed Range: 35 – 7000 RPM
Spindle Min. Indexing Angle: 0.001 Degree
Spindle End: 7.48″ (190mm) Flat

SUB-SPINDLE

Spindle Speed Range: 35 – 7000 RPM
Spindle Min. Indexing Angle: 0.001 Degree
Spindle Chuck Size: 6″ (152mm)
A-Axis Sub-Spindle Longitudinal Travel: 25.9″ (660mm)
A-Axis Rapid Traverse Rate: 787″/ Min. (20000mm/Min.)
E-Axis, Sub-Spindle Rotation: 360,000 at 0.001 Degree
E-Axis Cutting Feed Rate: 0 – 12000 Deg./Min.
Spindle End: 5.5″ (140mm) Flat

TOOL SPINDLE

Spindle Type: 1 Spindle with ATC
B-Axis, Tool Head Positioning Angle: 0 – 180 Degrees
Tool Spjndle Inedexing Angle: 4- Positions/ 90 Degrees
Tool Spindle Speeds: 80 – 6000 RPM
Boring Bar Shank Diameter: 1.25″ (32mm)
Tool Size: .78″ x .78″ (20mm x 20mm)
Tool Change Time, Tool to Tool: 0.8 Seconds
Tool Storage Size: 60 Tools
Tool Shank Taper: KM-40

MACHINE DIMENSIONS

Required Floor Space (Not Incl. Bar Feed): 138″ x 84″ (3500mm x 2126mm)
Height of Machine (Not Incl. Mist Collector): 88″ (2250mm)
Machin Weight (Not Incl. Bar Feed) Approx.: 17600 Lbs. (8000kg)

-EQUIPPED WITH-

Automatic Cutting Feed Acceleration/Deceleration
LNS Servo S2 Magazine Type Bar Loader
Through the Tool High Pressure Coolant
Chip Conveyor
Parts Catcher and Conveyor
ATS Collet Nose
Rigid Tapping
Flood Coolant

More Info: http://2spade.com/2003TsugamiTMA8.html

FOR ALL SURPLUS CNC…………..SURPLUSCNC.COM