2004 Kent USA ML-1740T (Manual Engine Lathe)

2004 Kent USA ML-1740T

Manual Engine Lathe

Swing Over Bed: 17”
Swing Over Cross slide: 11”
Swing Over Gap: 24.5”
Width of Bed: 12″
Distance Between Centers: 44”
Cross Slide Travel: 12”
Top Slide Travel: 4.75”
Spindle Speeds: 12
Spindle Speed Range: 36–1800 RPM
Through Hole Diameter: 3.125″
Spindle Nose: D1–6
Spindle to Sleeve Taper: MT#7 – MT#4
Thread capacity (inches): 45, 2 – 72 TPI
Thread capacity (metric): 39, 0.2 – 14 mm
Longitudinal Feeds: 0.0015”-0.04” in/rev
Cross Feeds: 0.00075”-0.02” in/rev
Modular Threads Range: 18, 0.3 – 3.5 m
Diametral Pitch Range: 21, 8 – 44 DP
Quill Travel: 5”
Quill Diameter: 2.3”
Quill Bore Taper: MT#4
Main Motor: 7.5 HP
Coolant Pump Motor: 1/8 HP
Control Circuit Voltage: 115 V
Packing Dimension: 88 x 42 x 66″
Net Weight: 3850 LBS
Gross Weight: 4510 LBS

More Info: http://2spade.com/2004KentUSAML1740T.html